Cannon Digi Troll 10 TS

The Cannon Digi Troll 10 TS down rigger is the Cadillac of down riggers.  The 10TS is definitely a top performer in every aspect with features to spare.  It makes every other rigger wish they could be like it.  Well that is until they see the price tag.  Even on sale you better plan on spending $1500+ to get it operational.  A standard electric rigger will run you around $500.  Why spend three times the cost?  It has features other riggers just don’t have, and it will help you catch fish.  Does a person need to spend the extra for a TS and its salt water rating?   To me the extra cost compared to quality gained is a great value.        

 

I had watched a couple other guides using Digi Trolls, and there were days they were catching fish and few others were.   Obviously I am in the business to catch fish, so it was a no-brainer I had to get one.  I have been running Scotty riggers for years, and they are one phenomenal rigger but they are not a Digi-Troll.  I wanted to run close to the bottom and target certain fish.  Using the Scotty to track bottom was pretty difficult in my situation.  Trying to run 3 riggers, 1-3 divers, driving the boat, netting fish, baiting gear, and interacting with clients makes it very difficult to run a rigger a few feet off the bottom.   

 

Photo By Char Harmier Photography

If you run an upper end Humminbird fish finder you can control it through the finder for either a Digi Troll 5 or 10.  Only the 10 operates by itself.  The features are pretty amazing, and everything is just at the touch of a button on the rigger.   I run Lowrance electronics so I adjust everything right on the riggers touch pad.   It is adjustable in every way possible.   It also will bottom track at a set distance off the bottom and cycle at two different depths for pre-set lengths of time.  You don’t need a black box with this rigger as it has Positive Ion built in.  These are just the main features it has, and if you run more then one rigger you can operate them all from the same rigger with each one doing different things.  Add in different cycle speeds, up down speeds, boom extension, etc. the list is long for features.

 

I bought it for one reason…BOTTOM TRACKING.  It requires its own transducer (if you don’t have a compatible Humminbird), and the transducer location is critical.   If you get any turbulence or even a tiny air bubble it affects how well it tracks.   The turbulence will cause the transducer to give momentary false readings.  This causes the rigger to continually adjust itself, and it will start running up and down like a Yo-Yo.   Other times it will drop it onto the bottom then snap up the slack in a huge slam.  It even jerked hard enough a couple times to cause the cable to jump the wheel at the boom end.   It took a while and mine is adjusted pretty good but not perfect.   I will have to have another bracket added to the boat this spring closer to the center line.   This should totally solve my false reading problem in rough or faster flowing water.    

 

Anglers all the time are asking me about it and what I think.   Like all anglers they are looking for the magic item to put more fish in the boat.   I reply back with a question “How many more fish a day would it take to justify spending three times the cost?”  Usually they think they should be getting double to triple the fish.  I tell them to save their money.   There is no doubt I have caught fish I never would have caught without the bottom tracking feature.   The difference for me is I have to catch fish (at least I think so), and if this rigger gets me the one fish I wouldn’t have hooked it’s worth it.  I also admit if I was not guiding clients I wouldn’t spend the extra money.   I still catch more fish at set depths then bottom tracking day in and day out.  I also remember two days where we boated 12 Salmon, and every one of them was bottom tracking.   I know I could have done close to the same thing with a Scotty if I was fishing with friends to help use my Scotty to bottom track.  In summary it is a great rigger with amazing features, but I don’t know if the extra cost is worth it for the average sport angler.  If that one fish in a trip is worth it then for sure the Digi Troll can help greatly.      

Walking Varminter Part 3

I am done with the first half of barrel break in.  This rifles bore is polishing up amazingly well.  I am getting almost no copper fouling already.  I use only one good soaking with Sweets and the copper is gone.  I am happy so far.   Now is the time to start three the
 shot break in, so I better mount up the scope.

 

 I can then get the scope zeroed very close to where I want it for load development.  I had two options for this rifle a Burris Fullfield II Ballistic Plex 4.5-14x, or a Leupold VXIII 4.5-14x with target turrets both matte finish.  The Leupold I think is the better overall scope, but the Burris is top quality and fits this rifles purpose better.  I rank the Burris Fullfield II line of scopes as probably the best value going today.  I want a 0-500 yard rifle with specific aiming points for a two inch kill zone.  I also wanted those aiming points quickly without having to turn the turrets, so the Ballistic Plex was the answer.  Sure I could have a custom reticle built for the Leupold, but that is more money and time.  Besides it has target turrets already.   I will just have to get another rifle that fits its design.  As many of you know you shoot a varmint the first chance you get or you may not get another one.  There is no messing around getting everything all ready and adjusted.

 

I have used Leupold standard bases and rings on 95% of my rifles without a single problem.  I went with the “High” rings to allow good head positioning regardless of clothing or shooting position.  I also went with reversible bases so it allows the most adjustment for the best fit.  I do not Lock Tite in the screws on the bases or rings.  I clean the threads with rubbing alcohol and air.  Then lightly oil (Tetra Oil!) the threads and tighten down tight.  The front is a twist in base, and I get it as close as I can by eye with the plastic wrench designed for this.   Then I clamp of an old straight tube (Balvar) scope in the front ring with nothing on the back.  I don’t trust any cheap adjustable scopes I would use as a wrench to maintain center so I used a fixed cross hair.  Using the Bore Sight and scope I make final adjustments to the base until the scope is perfectly centered.   Then I put the back base in place, and equally (1/16 turns) apply the rear screws making sure the center doesn’t change.  That is the best way I know to mount a scope to the bores center.  It doesn’t mean the reticle is level to the bore but the scope is centered.

    

Then I turn the scope to its highest power.  Holding the rifle like I will be shooting it with my eyes closed I open my eyes when the gun feels in the perfect position.   Then I move the scope forward or backward until I have the fullest view through the scope with no shadows.  It takes more then once, and it is obvious when you have it mounted correctly.  Because it is set on the highest magnification you will always have a full view on lower settings.  I line up the cross hairs with a straight line across the shop and tighten the rings again equally with small partial turns.  Final adjustments with the turrets on the bore sight and it’s now ready for paper.   I will make final adjustments with the 2^nd and 3^rd rounds as I go until close.  The Point of Impact (POI) will move slightly, but will be well within where I want it. 

 

Ron

Finally Some Fishing

After almost a year of talking about when we were going to find time to go fishing, it finally happened. My wife and Maddy were out of town on a trip and I didn't work so I had a free day, and R-Dub Outdoor Pro-staffer Ron Oules had a free day to do what he wanted. Of course Ron wanted to go fishing.

I asked him what time he wanted to meet in Pateros, WA and he said 6 which meant getting up at 5 am to leave the house by 5:30. I arrived right on time, threw my bag and camera in the truck and away we went. Of course the first thing I asked was "Are your friends still catching lots of fish?" His reply of "No" did not instill a bunch of confidence.

We make the half hour drive to Manson, WA and see that there are already plenty of fishermen on the water. We put the boat in the water at Old Mill Park. Of course the first thing I do is forget my lunch and snacks in my bag in the truck, oh well.

You could not of asked for a more beautiful morning on the water. It was glass calm with a gentle breeze.

We get the rigs set up and I get a quick lesson in down riggers. The lesson was simple - "don't screw up".

About 10 minutes later it was "FISH ON". Now catching any fish is fun, but I can't say that these Kokanee are hard fighters. They also have a soft jaw so you can't just horse them in or you risk ripping the hook out.

About two hours in and we had landed about 10 fish. I was happy with the day at that point. The best part was that Ron lost the first fish of the day.  Of course I did not let him forget it. But as the fish "Karma" goes around and comes around I ended up missing a bite and losing a hooked fish by the end of the day. But hey who's really keeping track?

Now out in this area there are plenty of boats in a small area. Although I am not a freshwater fishing expert I do know that asking how deep or what are you using is against fishing etiquette. So the good old adage of "If you are not lying you are not fishing." came to mind.  So of course some other fishermen could not resist asking how deep we were. Our go to answer was haven't caught anything above 90 feet deep.  In reality we were between 70 and 50 feet the whole day. When they asked what we were using we said green cut plug with sweet corn. In reality we were using a pink squid.

Now you all should feel lucky that I was able to divulge some secrets of the trade. I hope it will work out for you.

At the end of the day we ended up with 15 fish.  When we pulled out of the water the other boats were only reporting one to five fish caught. But, I did not see their fish to verify their stories.

If you ever get a chance to go to Lake Chelan for a Kokanee fishing trip I would highly recommend it.

Walking Varminter Part 2

 

I picked up the new Savage 116FHSS the other day.  I looked at everything from metal work, stock fit, action fitting, sling studs, etc, and it all looks well put together.   I was a little bummed about how the muzzle crown looked.  I think it should have been smoother the entire edge to edge, but I don’t see anything that looks cut crooked.   I have worked with a lot of Savage rifles over the years, and they are just flat kicking the butt of the other makers.   I started out as Remington 700 guy, and then transitioned to Brownings.  Rifle to rifle the Savage has always been more accurate.

 

This rifle has the new Accu Stock 2 so I compared it to a new Remington BDL/CDS synthetic stock. The Accu Stock is 10 times the stock quality with an aluminum bedding system and much better molding and stiffness. The only thing the Remington has is a little better feel. I was frustrated with the Savage bolt removal process, but now that I have done it a few times it is pretty easy. Taking the action out of the stock was probably as difficult if not more so then a fully bedded rifle. While I had the action out of the stock I adjusted the Accu Trigger down from its factory 3# to 2.25#. I made some minor adjustments in addition to the provided set screw. After putting it back together I checked the locking lug engagement and it is acceptable.

 

I then start the cleaning process step by step:              

 

1. With my home brew powder solvent of 50-50 Kroil/GM Top Engine cleaner.   I use a coated cleaning rod, bore guide, copper brushes,  and  clean the dirty solvent out with 100% cotton patches with a jag.
1.   I don’t just sit and scrub with the bore brush until it is wore out.  I use five brush passes, clean patch, wet patch, dry patch and repeat if needed.  
2. After I clean the powder fouling out I use Sweets 7.62 with a nylon brush to get the copper out.   Dry patches after letting the solvent soak a while to get the dirty Sweets out. 
3.  I continue with Sweets until no more light blue shows on the first patch after soaking.
4.  One more time with the copper brush, solvent and dry patches.
5.  Finally I use JB Bore Past starting with blue “Cleaner” and finishing with red “Polish”. 

1.  I wrap my cotton patches coated with paste around a nylon brush, and really work them back and forth for a long time.  
6. Then I clean the bore with solvent and lightly oil with Rem Oil. 

 

The small bore of the 22cal takes more time and effort, but it has always been worth it for me. 

 

I load up three casings with a heavy bullet and moderate powder charge.  These are just for barrel break in.  I will shoot them one at a time making sure each casing has the same number of firings.  Luckily I can shoot within walking distance of the house, so I just go out and fire one round and fully clean the gun.  This will take some time as I will do single rounds for 50 times, and then will do three rounds for 20 times.  Every single time the barrel will be fully cleaned and polished before doing the same thing again. 

  

Ron

Walking Varminter Project

The old heavy gun

I am tired of packing my heavy bull barreled varmint guns.   I love them for their insane accuracy, non-existent recoil, and dozen round capability.  I hate them for their poor balance, speed of movement, and heavy log weight.  I have been debating it and now is as good a time as any to buy a new gun.  I know the coyotes are hooking up and by the time I get it done it will be spring.  I promise I will show a picture of the first varmint killed with this gun but it may not be a coyote.

I wanted an easily available commercial round from a factory production gun in a 22 center fire cartridge.  It has to be 22 cal or I can’t use it during the big game season in Washington.   I would have preferred a 6mm caliber but it is not an option this time.  The gun must be Stainless Steel with a synthetic stock.   I am a velocity freak within my budget so the obvious choice is a 220 Swift.  Well heck I can’t find a Stainless 220 Swift, so I must go to the next obvious choice a 22-250.  I have one 22-250 that shoots in the high 1’s to low 2’s so I know this cartridge is accurate and fast. 

I call my local dealer and put together a “Group Buy” to get a discount.   You should put together a group buy with your favorite gun shop and save a lot of cash.  If your dealer won’t do a group buy I would find a new shop.   I order up the brand with consistently the most accurate rifle not specifically factory sorted available.  Yes, you got it right a SAVAGE in the 116 model.  The 112 is the most accurate…but it is still a Savage. I am telling you if you want a stock rifle that shoots super accurately then buy a Savage.  You can save some money by buying a Stevens…same rifle with the old trigger and stock system from Savage.  I have one old style Savage trigger set at 18oz….and the safety works!!  I don’t want to get in a debate because there are some great rifles out there.  My most accurate big game rifle is a totally stock Browning, but no one builds accuracy into every rifle like Savage. 

My rifle is in and I will pick it up next week.   I will walk you through the entire process I use with every rifle I have.  (I know it is only two, but I do this every time.)  I will cover everything from barrel break in to lube choice.  Just my opinions and experiences, and I hope I can help you save time and un-needed expenses.   Stay Tuned

Ron

Misclipped Steelhead

This weekend brought up an important issue hopefully all Steelhead anglers encounter.  It is more and more common to catch fish with a partially or “Misclipped” Adipose fin.  We usually end up with 4-5 misclipped fish every year.  Not a huge number but I would say around 1 percent are misclipped.  I have noticed an increase now that the automatic clipping process is being used.   When the fish were clipped by hand there were very few, and any misclipped were still very obviously clipped. 

Misclipped Adipose Fin

I can usually tell pretty quickly as soon as I can see the fish for the first time - even eight feet under water - if it is a keeper or not.  Just one of those things that comes with experience and looking for it.  In this instance, I called it as a non-clipped well before it was netted, and the client was a little disappointed to hear he had to let it go.  When it was finally time to net the fish I could then tell it was worth a closer look.  The client commented that he could now see the fin, and he also believed it should go back.  I got a closer look after the hook was removed.   The fin had an obvious flat top and was more of a line from the back to the back edge.  The Adipose fin is normally rounded across the top, and the arch starts right at the back line. 

Wild Fish

I told the client he had his first keeper of the day and hoisted it in the boat.  There was a lot of concern from the clients, and I finally told him it was 100% my responsibility.  My accepting the responsibility seemed to settle his nerves a little, so I introduced the fish to the love stick.  Now I will admit only a very few people would have kept the fish because of the noticeable fin.   I will also tell anyone if you have any doubt at all turn the fish loose.  Do not ever keep a fish you are not sure is a clipped fish.  We have a mandatory keep fishery.  The more clipped fish we remove the higher probability of the fishery remaining open in the future.     

We ended the day with 9 boated and several keepers.  We headed in and the WDFW Creel Checking staff was at the dock waiting.  The client with the misclipped fish started getting nervous again.  It didn’t help with his buddy telling him he was going to jail because it was on his card not mine.  We saved the misclipped fish for last, and the checkers initially caught their breath.  As soon as the checker got a closer look though, the checker said it was a hatchery fish.  In addition to the misclipped fin, the checker could see another marking on the fish that indicated it was from the Wenatchee area.  The magic wand beeped (collecting the PIT tag number identifying the fish), and the head went in the bag.  Another great day Steelhead fishing and educating other anglers about is what it’s all about.

 

Ron  


Editors note: Please remember we were 100% sure of the misclip through our experience. If you are not sure let the fish go. We are not responsible if you keep a wild fish thinking it is a misclip.

Wenatchee Sportsman Show

So today my family and I went to the Wenatchee Sportsmans  Show in Wenatchee, WA  My daughter was excited to see the live black bears and I was excited to see if I could find some great gear to review.

First I spoke with Glenn at the Northwest Coolers booth.  They sell Coolers made by Canyon Coolers. They are said to be just as strong as Yeti Coolers but half the price. They looked great and seemed to have a great design.

After looking at coolers I went and spoke with Mike Carolus who owns High County Hunting which makes heavy duty game bags among other things. I looked at both the deer bag and the travel bag. The bags are made out of tough canvas. The travel bag is made for the deer or elk you kill miles from the road. It allows you to bone out your game and put it into a protective bag that has straps so you can pack it out on you horse, ATV or on your back.

I want to give a big thanks to Mike Hynemm from KoneZone. He jumped right on the R-Dub Outdoors band wagon and supplied us with a bunch of fishing gear for salmon & steelhead, for future reviews and a giveaway or two. He gave us some brine, UV flashers, and stickers to put on flashers to make them more realistic, and some scentless fake eggs for steelhead fishing.  Mike has a great web page - check out his site for your fishing needs.






Another booth that caught my attention was the Handy Sharp tool. Chad Ruseler was running this booth. This small carbide tool quickly sharpens all your tools with a quick slide down the blade. I think this would make a great addition to your survival and hunting toolbox.







Eagle Tac Flashlights also caught my eye. I was told they are just as bright if not brighter than the main brand lights, but half the price. I would really like to take one to work with me and try it out.

I finished the day talking with a couple of outfitters and guides from Eastern Washington.

I really hope I get to work with at least a few of these great companies I met with today, only time will tell. I can't wait for the next show and I hope the Wenatchee show gets bigger every year.